Rockchip open source Document - User contributions [en]

RK3399

2017-03-07T06:51:21Z

Dxj:

= Overview =

       RK3399 is a low power, high performance processor for computing, personal mobile internet devices and other smart device applications. Based on Big.Little architecture, it integrates dual-core Cortex-A72 and quad-core Cortex-A53 with separate NEON coprocessor.        Many embedded powerful hardware engines provide optimized performance for high-end application. RK3399 supports multi-format video decoders including H.264/H.265/VP9 up to4Kx2K@60fps, especially, H.264/H.265 decoders support 10bits coding, and also supports H.264/MVC/VP8 encoders by 1080p@30fps, high-quality JPEG encoder/decoder, and special image preprocessor and postprocessor.        Embedded 3D GPU makes RK3399 completely compatible with OpenGL ES1.1/2.0/3.0/3.1, OpenCL and DirectX 11.1. Special 2D hardware engine with MMU will maximize display performance and provide very smooth operation.        RK3399 has high-performance dual channel external memory interface (DDR3/DDR3L/LPDDR3/LPDDR4) capable of sustaining demanding memory bandwidths, also provides a complete set of peripheral interface to support very flexible applications.

= SoC Features =

*CPU:
**Big.Little architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU
**Frequency is over 1.8GHz (Big cluster)
*GPU:
** Mali-T864 GPU, OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11
**Supports AFBC (ARM Frame Buffer Compression)
*Display:
**Dual VOP: one supports 4096x2160 with AFBC supported；The other supports 2560x1600
**Dual channel MIPI-DSI (4 lanes per channel)
**eDP 1.3 (4 lanes with 10.8Gbps) to support display, with PSR
**HDMI 2.0 for 4K 60Hz with HDCP 1.4/2.2
**DisplayPort 1.2 (4 lanes, up to 4K 60Hz)
**Supports Rec.2020 and conversion to Rec.709
*Camera:
** Dual mipi CSI，dual ISP,Maximum input resolution of 13M pixels
*Memory:
**Dual channels 64-bit DRAM controller
**Support DDR3/DDR3L, LPDDR3, LPDDR4
*Connectivity:
**PCIe 2.1 (4 full-duplex lanes with 20Gbps)
**Embedded low power MCU for other application
**8 channels I2S supports 8 channels RX or 8 channels TX

 

= History =

 

= Documentation =

 

= Software =

== Borad configuration ==

{| border="1" cellpadding="1" cellspacing="1" style="line-height: 1.6; width: 768px;"
|-
| style="width: 119px; text-align: center;" | '''board'''
| style="width: 172px; text-align: center;" | '''kernel'''
| style="width: 124px; text-align: center;" | '''uboot'''
| style="width: 310px; text-align: center;" | '''dts'''
|-
| style="width: 119px; text-align: center;" | rk3399-excavator
| style="width: 172px; text-align: center;" | rockchip_linux_defconfig
| style="width: 124px; text-align: center;" | rk3399_linux_defconfig
| style="width: 310px; text-align: center;" | rk3399-sapphire-excavator-linux.dts
|}

 

== Chip configuration ==

{| border="1" cellpadding="1" cellspacing="1" style="width: 737px;"
|-
| style="width: 68px; text-align: center;" | '''chip'''
| style="width: 140px; text-align: center;" | '''Kernel eMMC index'''
| style="width: 143px; text-align: center;" | '''Kernel SD index'''
| style="width: 140px; text-align: center;" | '''Uboot eMMC index'''
| style="width: 118px; text-align: center;" | '''Uboot SD index'''
| style="width: 95px; text-align: center;" | '''Baud speed'''
|-
| style="width: 68px; text-align: center;" | RK3399
| style="width: 140px; text-align: center;" | 1
| style="width: 143px; text-align: center;" | 0
| style="width: 140px; text-align: center;" | 0
| style="width: 118px; text-align: center;" | 1
| style="width: 95px; text-align: center;" | 1500000
|}

== How to get the sources ==

The rockchip linux SDK source tree is located in multi Git repository hosted by Github. The SDK uses repo to sync down source code. Beside the generic community Linux support, we have chip optimized Linux SDK and it's also opensource and can get source from github.

RK3399 optimized Debian & Buildroot
<pre>repo init -u https://github.com/rockchip-linux/manifests https://github.com/rockchip-linux/manifests -m rk3399.xml
repo sync
</pre>

== How to build the sources ==

=== Build Environment ===

You need a 64-bit Ubuntu. Note: old versions Ubuntu maybe have compatibility issues. Use below commands to install Ubuntu packages: $ sudo apt-get install git gnupg flex bison gperf build-essential \ zip tar curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \ libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \ libgl1-mesa-dev g++-multilib mingw32 cmake tofrodos \ python-markdown libxml2-utils xsltproc zlib1g-dev:i386 lzop $ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gn u/libGL.so

Install ARM cross-compile tool chain and compile kernel relative software package: 

$ sudo apt-get install gcc-arm-linux-gnueabihf gcc-aarch64-linux-gnu device-tree-compiler lzop libncurses5-dev libssl1.0.0 libssl-dev

=== Installing the build tools and download source ===

Please follow [http://rockchip.wikidot.com/linux-user-guide linux user guide] to install the build tools and download source.

 

=== Building kernel ===

For ARM V8 (RK3399 optimized SDK)
<pre>make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- rockchip_linux_defconfig
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- rk3399-sapphire-excavator-linux.img -j4</pre>

=== Building uboot ===

For RK3399 optimized SDK (rkproduct uboot)
<pre>CROSS_COMPILE=aarch64-linux-gnu- make rk3399_linux_defconfig all</pre>

=== Building rootfs ===

==== Debian ====

Yu can download the prebuilt image directly.

[http://pan.baidu.com/s/1eSE1tfW Baidu Pan]、[https://drive.google.com/folderview?id=0BwAJtUrQohwXdGRVYTAwdlJDOUU&usp=sharing Google Drive]

or you could use the [https://github.com/rockchip-linux/rk-rootfs-build rootfs-build-script] from Rockchip to build rootfs yourselves.

==== Yocto ====

If you want to use Yocto to build your rootfs see [http://rockchip.wikidot.com/yocto-user-guide yocto-user-guide] for detail.

==== Buildroot ====

If you want to use Buildroot to build your rootfs see [http://rockchip.wikidot.com/buildroot-user-guide buildroot-user-guide] for detail.

 

= Devices =

If you need the rk3399-excavator board, please communicate through the following contact information.
<pre>Telephone: 4007700590 Email: service@rock-chips.com</pre>

= See also =

= Owners of the SoC on IRC =

= Commuity Support =

= References =

= Exteneral Links =

RK3399

2017-03-07T03:46:00Z

Dxj:

= Overview =

= SoC Features =

*CPU:
**Big.Little architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU
**Frequency is over 1.8GHz (Big cluster)
*GPU:
** Mali-T864 GPU, OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11
**Supports AFBC (ARM Frame Buffer Compression)
*Display:
**Dual VOP: one supports 4096x2160 with AFBC supported；The other supports 2560x1600
**Dual channel MIPI-DSI (4 lanes per channel)
**eDP 1.3 (4 lanes with 10.8Gbps) to support display, with PSR
**HDMI 2.0 for 4K 60Hz with HDCP 1.4/2.2
**DisplayPort 1.2 (4 lanes, up to 4K 60Hz)
**Supports Rec.2020 and conversion to Rec.709
*Camera:
** Dual mipi CSI，dual ISP， each up to 13M 
*Memory:
**Dual channels 64-bit DRAM controller
**Support DDR3/DDR3L, LPDDR3, LPDDR4
*Connectivity:
**PCIe 2.1 (4 full-duplex lanes with 20Gbps)
**Embedded low power MCU for other application
**8 channels I2S supports 8 channels RX or 8 channels TX

 

= History =

 

= Documentation =

 

= Software =

== Borad configuration ==

{| border="1" cellpadding="1" cellspacing="1" style="line-height: 1.6; width: 768px;"
|-
| style="width: 119px; text-align: center;" | '''board'''
| style="width: 172px; text-align: center;" | '''kernel'''
| style="width: 124px; text-align: center;" | '''uboot'''
| style="width: 310px; text-align: center;" | '''dts'''
|-
| style="width: 119px; text-align: center;" | rk3399-excavator
| style="width: 172px; text-align: center;" | rockchip_linux_defconfig
| style="width: 124px; text-align: center;" | rk3399_linux_defconfig
| style="width: 310px; text-align: center;" | rk3399-sapphire-excavator-linux.dts
|}

 

== Chip configuration ==

{| border="1" cellpadding="1" cellspacing="1" style="width: 737px;"
|-
| style="width: 68px; text-align: center;" | '''chip'''
| style="width: 140px; text-align: center;" | '''Kernel eMMC index'''
| style="width: 143px; text-align: center;" | '''Kernel SD index'''
| style="width: 140px; text-align: center;" | '''Uboot eMMC index'''
| style="width: 118px; text-align: center;" | '''Uboot SD index'''
| style="width: 95px; text-align: center;" | '''Baud speed'''
|-
| style="width: 68px; text-align: center;" | RK3399
| style="width: 140px; text-align: center;" | 1
| style="width: 143px; text-align: center;" | 0
| style="width: 140px; text-align: center;" | 0
| style="width: 118px; text-align: center;" | 1
| style="width: 95px; text-align: center;" | 1500000
|}

== How to get the sources ==

The rockchip linux SDK source tree is located in multi Git repository hosted by Github. The SDK uses repo to sync down source code. Beside the generic community Linux support, we have chip optimized Linux SDK and it's also opensource and can get source from github.

RK3399 optimized Debian & Buildroot
<pre>repo init -u https://github.com/rockchip-linux/manifests https://github.com/rockchip-linux/manifests -m rk3399.xml
repo sync
</pre>

== How to build the sources ==

=== Build Environment ===

You need a 64-bit Ubuntu. Note: old versions Ubuntu maybe have compatibility issues. Use below commands to install Ubuntu packages: $ sudo apt-get install git gnupg flex bison gperf build-essential \ zip tar curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \ libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \ libgl1-mesa-dev g++-multilib mingw32 cmake tofrodos \ python-markdown libxml2-utils xsltproc zlib1g-dev:i386 lzop $ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gn u/libGL.so

Install ARM cross-compile tool chain and compile kernel relative software package: 

$ sudo apt-get install gcc-arm-linux-gnueabihf gcc-aarch64-linux-gnu device-tree-compiler lzop libncurses5-dev libssl1.0.0 libssl-dev

=== Installing the build tools and download source ===

Please follow [http://rockchip.wikidot.com/linux-user-guide linux user guide] to install the build tools and download source.

 

=== Building kernel ===

For ARM V8 (RK3399 optimized SDK)
<pre>make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- rockchip_linux_defconfig
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- rk3399-sapphire-excavator-linux.img -j4</pre>

=== Building uboot ===

For RK3399 optimized SDK (rkproduct uboot)
<pre>CROSS_COMPILE=aarch64-linux-gnu- make rk3399_linux_defconfig all</pre>

=== Building rootfs ===

==== Debian ====

Yu can download the prebuilt image directly.

[http://pan.baidu.com/s/1eSE1tfW Baidu Pan]、[https://drive.google.com/folderview?id=0BwAJtUrQohwXdGRVYTAwdlJDOUU&usp=sharing Google Drive]

or you could use the [https://github.com/rockchip-linux/rk-rootfs-build rootfs-build-script] from Rockchip to build rootfs yourselves.

==== Yocto ====

If you want to use Yocto to build your rootfs see [http://rockchip.wikidot.com/yocto-user-guide yocto-user-guide] for detail.

==== Buildroot ====

If you want to use Buildroot to build your rootfs see [http://rockchip.wikidot.com/buildroot-user-guide buildroot-user-guide] for detail.

 

= Devices =

If you need the rk3399-excavator board, please communicate through the following contact information.
<pre>Telephone: 4007700590 Email: service@rock-chips.com</pre>

= See also =

= Owners of the SoC on IRC =

= Commuity Support =

= References =

= Exteneral Links =