Difference between revisions of "Boot option"

From Rockchip open source Document
Jump to: navigation, search
 
(77 intermediate revisions by 6 users not shown)
Line 1: Line 1:
 +
 +
 +
= Boot introduce =
 +
 +
First, let's make the concept clear, there are many boot stages when we boot up a Linux OS;
 +
 +
Then we need to know about how the image should packaged, where the image locate;
 +
 +
At last, we will explain how to write to different media and boot from there.
 +
 +
Here is Rockchip pre-released binaries which may be mentioned later:
 +
 +
[https://github.com/rockchip-linux/rkbin https://github.com/rockchip-linux/rkbin]
 +
 +
And [http://opensource.rock-chips.com/wiki_Partitions Rockcip Linux GPT partition] here.
  
 
 
 
 
  
−
= overview =
+
== Boot flow ==
−
<pre>+--------+----------------+----------+-----------+
+
 
−
| Boot  | Terminology #1 | Actual  | Rockchip |
+
This chapter introduce the generic boot flow for Rockchip Application Processors, including&nbsp;the detail about what image we may use in Rockchip platform&nbsp;for kind of boot path:
−
| stage  |                | program  |  Loader  |
+
 
−
| number |                | name    |  Name   |
+
- use U-Boot TPL/SPL from upsream or rockchip U-Boot, fully source code;
−
+--------+----------------+----------+-----------+
+
 
−
| 1      |  Primary      | ROM code | BootRom   |
+
- use Rockchp idbLoader which is combinded by Rockchip ddr init bin and miniloader bin from Rockchip [https://github.com/rockchip-linux/rkbin rkbin project];
−
|        |  Program      |          |           |
+
<pre>+--------+----------------+----------+-------------+---------+
−
|        |  Loader        |          |           |
+
| Boot  | Terminology #1 | Actual  | Rockchip   | Image  |
−
|        |                |          |           |
+
| stage  |                | program  |  Image      | Location|
−
| 2      |  Secondary    | u-boot   | MiniLoader|
+
| number |                | name    |  Name     | (sector)|
−
|        |  Program      | SPL     |           |
+
+--------+----------------+----------+-------------+---------+
−
|        |  Loader (SPL)  |          |           |
+
| 1      |  Primary      | ROM code | BootRom     |        |
−
|        |                |          |           |
+
|        |  Program      |          |             |        |
−
| 3      |  -            | U-Boot  |  U-Boot   |
+
|        |  Loader        |          |             |        |
−
|        |                |          |           |
+
|        |                |          |             |        |
−
|        |                |          |           |
+
| 2      |  Secondary    | U-Boot   |idbloader.img| 0x40    | pre-loader
−
| 4      |  -            | kernel  |  kernel  |
+
|        |  Program      | TPL/SPL |            |         |
−
|        |                |          |           |
+
|        |  Loader (SPL)  |          |             |        |
−
| 5      |  -            | rootfs  |  rootfs  |
+
|        |                |          |             |        |
−
+--------+----------------+----------+-----------+
+
| 3      |  -            | U-Boot  | u-boot.itb | 0x4000  | including u-boot and atf
 +
|        |                |          | uboot.img   |         | only used with miniloader
 +
|        |                |          |             |        |
 +
|        |                | ATF/TEE  | trust.img  | 0x6000  | only used with miniloader
 +
|        |                |          |             |        |
 +
| 4      |  -            | kernel  | boot.img    | 0x8000 |
 +
|        |                |          |             |        |
 +
| 5      |  -            | rootfs  | rootfs.img | 0x40000 |
 +
+--------+----------------+----------+-------------+---------+
 
</pre>
 
</pre>
 +
 +
Then when we talking about boot from eMMC/SD/U-Disk/net, they are in different concept:
 +
 +
*Stage 1 is always in boot rom, it loads stage 2 and may load stage 3(when SPL_BACK_TO_BROM option enabled).
 +
*Boot from SPI flash means firmware for stage 2 and 3(SPL and U-Boot only) in SPI flash and stage 4/5 in other place;
 +
*Boot from eMMC means all the firmware(including stage 2, 3, 4, 5) in eMMC;
 +
*Boot from SD card means all the firmware(including stage 2, 3, 4, 5) in SD card;
 +
*Boot from U-Disk means firmware for stage 4 and 5(not including SPL and U-Boot) in Disk, optionally only including stage 5;
 +
*Boot from net/tftp means firmeware for stage 4 and 5(not including SPL and U-Boot) on the network;
  
 
&nbsp;
 
&nbsp;
  
−
== Boot from eMMC ==
+
[[File:Rockchip bootflow20181122.jpg|1000x1000px|Rockchip bootflow.jpg]]
 +
 
 +
Boot Flow 1 is typical Rockchip boot flow with Rockchip miniloader;<br/> Boot Flow 2 is used for most SoCs with U-Boot TPL for ddr init and SPL for trust(ATF/OP-TEE) load and run into next stage;<br/> <br/> Note 1. If loader1 have more than 1 stage, program will back to bootrom and bootrom load and run into next stage. eg. If loader1 is tpl and spl, the bootrom will run into tpl first, tpl init ddr and back to bootrom, bootrom then load and run into spl.<br/> Note 2. If trust is enabled, loader1 need to load both trust and u-boot, and then run into trust in secure mode(EL3 in armv8), trust do the initialize and run into U-Boot in non-secure mode(EL2 in armv8).<br/> Note 3. For trust(in trust.img or u-boot.itb), armv7 has only one tee.bin with or without ta, armv8 has bl31.elf and option with bl32.<br/> Note 4. In boot.img, content can be zImage and its dtb for Linux, and can optionally be grub.efi, and can be AOSP boot.img, ramdisk is option;
 +
 
 +
== Package option ==
  
−
=== &nbsp;To get tool and firmware ===
+
After we know about the boot stages,
  
−
[[Rkdevelptool|tools]]
+
Here are the file list before package for stage 2~4:
  
−
=== Flash&nbsp;to the board by USB ===
+
*From source code:
 +
**From U-Boot: '''u-boot-spl.bin''', '''u-boot.bin'''(may use u-boot-nodtb.bin and u-boot.dtb instead),
 +
**From kernel: kernel '''Image/zImage''' file, kernel dtb,
 +
**From ATF: '''bl31.elf'''; 
 +
*From Rockchip binary:
 +
**ddr, usbplug, miniloader, bl31/op-tee, (all with&nbsp;chip 'rkxx_'&nbsp; prefix and with version '_x.xx.bin' postfix); 
  
−
In order to&nbsp;flash&nbsp;by USB,you must get your board into ROM boot mode, either by erasing<br/> your MMC or holding the maskrom button when you boot the board.
+
We offer two different boot-loader methods for different solutions, the steps and request files are also complete different. But not all the platforms supports the both boot-loader methods. Here are the types to&nbsp;package image from those files:
  
 
&nbsp;
 
&nbsp;
  
−
==== RK3288(upgrade_tool) ====
 
  
−
To create a suitable image and flash&nbsp;it to the board:<br/> default&nbsp;: with CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
 
−
<pre>tools/mkimage -n rk3288 -T rksd -d spl/u-boot-spl-dtb.bin out<br/> cat u-boot-dtb.bin >> out<br/> sudo upgrade_tool db&nbsp; ../rkbin/rk32/RK3288UbootLoader_V2.30.06.bin<br/> sudo upgrade_tool wl 64 out<br/> sudo upgrade_tool rd</pre>
 
  
−
<br/> others&nbsp;: firefly（Recommend using sd card）
 
  
−
&nbsp;
 
  
−
&nbsp;
+
=== The Pre-bootloader(IDBLoader) ===
  
−
==== RK3036 ====
+
==== What is idbloader ====
  
−
To create a suitable image and flash&nbsp;it to the board:
+
idbloader.img is a Rockchip format pre-loader suppose to work at SoC start up, it contains:
−
<pre>tools/mkimage -n rk3036 -T rksd -d spl/u-boot-spl-dtb.bin out
 
−
cat u-boot-dtb.bin >> out
 
−
sudo upgrade_tool db  ../rkbin/rk30/RK3036MiniLoaderAll_V2.19.bin
 
−
sudo upgrade_tool wl 64 out
 
−
sudo upgrade_tool rd
 
−
</pre>
 
  
−
&nbsp;
+
- IDBlock header which is known by Rockchip BootRom;
  
−
==== RK3399 ====
+
- DRAM init program which is load by MaskRom and running at internal SRAM;
−
<pre>cd ..
 
−
./rkbin/tools/trust_merger ./rkbin/tools/RK3399TRUST.ini
 
−
cd uboot
 
  
−
../rkbin/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img
+
- loader for next stage which is load by MaskRom and running at DDR SDRAM;
  
−
sudo upgrade_tool UL  ../rkbin/rk33/RK3399MiniLoaderAll_V1.05.bin
+
You can get idbloader with below methods.
−
sudo upgrade_tool DI uboot uboot.img  ../rkbin/tools/rk3399_parameter.txt
 
−
sudo upgrade_tool DI trust ../trust.img  ../rkbin/tools/rk3399_parameter.txt
 
−
sudo upgrade_tool rd
 
−
</pre>
 
  
−
&nbsp;
+
==== Get idbloader for eMMC from Rockchip release loader ====
  
−
&nbsp;
+
No need to package a idbloader.img for eMMC if you are using Rockchip release loader, you can get idbloader on eMMC with below command:
 +
<pre>rkdeveloptool db rkxx_loader_vx.xx.bin
 +
rkdeveloptool ul rkxx_loader_vx.xx.bin</pre>
  
−
=== &nbsp;To flash kernel and rootfs ===
+
==== Package the idbloader.img from Rockchip binary: ====
  
−
Enter into the uboot and issue the following command on uboot: (otg should be connected)
+
For SD boot or eMMC(update with rockusb wl cmd), you need a idbloader(combinded with ddr and miniloader) .
−
<pre>gpt write mmc 0 $partitions
+
<pre>tools/mkimage -n rkxxxx -T rksd -d rkxx_ddr_vx.xx.bin idbloader.img
−
ums 0 mmc 0
+
cat rkxx_miniloader_vx.xx.bin >> idbloader.img
 
</pre>
 
</pre>
  
−
<br/> Now the board will act as an USB-drive.<br/> In host: (assuming sdb is ur device)
+
==== Package the idbloader.img from U-Boot&nbsp;TPL/SPL(which is fully open source): ====
−
<pre>sudo mkfs.fat /dev/sdb6
+
<pre>tools/mkimage -n rkxxxx -T rksd -d tpl/u-boot-tpl.bin idbloader.img
 +
cat spl/u-boot-spl.bin >> idbloader.img
 
</pre>
 
</pre>
  
−
<br/> Copy zimage and dts file to dev/sdb6
+
Flash the idbloader.img to offset 0x40 which including stage 2, and you will need a uboot.img for boot stage 3.
−
<pre>cp arch/arm/boot/zImage /media/chen/9F35-9565/
+
 
−
cp arch/arm/boot/dts/rk3288-fennec.dtb /media/chen/9F35-9565/rk3288-fennec.dtb
+
=== U-Boot ===
 +
 
 +
==== uboot.img ====
 +
 
 +
When using idbLoader from&nbsp;Rockchip miniloader, need package u-boot.bin into miniloader loadable format by Rockchip tool loaderimage.
 +
<pre>tools/loaderimage --pack --uboot u-boot.bin uboot.img $SYS_TEXT_BASE</pre>
 +
 
 +
Where SoCs may have different&nbsp;$SYS_TEXT_BASE.
 +
 
 +
==== u-boot.itb ====
 +
 
 +
When using SPL to load the ATF/OP-TEE, package the bl31.bin, u-boot-nodtb.bin and uboot.dtb into one FIT image. You can skip the step to package the Trust image and flash that image in the next section.
 +
<pre>make u-boot.itb
 
</pre>
 
</pre>
  
−
Add extlinux/extlinux.conf to dev/sdb6<br/> (Please notice "mmcblk2p7" and "115200n8" is decide on your chip, Please refer to&nbsp;[http://rockchip.wikidot.com/linux-user-guide#toc1 config table])
+
Note: please copy the trust binary() to u-boot root directory and rename it to tee.bin(armv7) or bl31.elf(armv8).
−
<pre>label kernel-4.4
+
 
−
    kernel /zImage
+
=== Trust ===
−
    fdt /rk3288-fennec.dtb
+
 
−
    append  earlyprintk console=tty1 console=ttyS2,115200n8 rw root=/dev/mmcblk2p7 rootfstype=ext4 init=/sbin/init
+
==== trust.img ====
−
</pre>
+
 
 +
When using idbLoader from&nbsp;Rockchip miniloader, need package bl31.bin into miniloader loadable format by Rockchip tool trustmerge.
 +
<pre>tools/trustmerge tools/rk_tools/RKTRUST_RKXXXXTRUST.ini</pre>
 +
 
 +
Flash the trust.img to offset 0x6000 which is for using Rockchip miniloader
 +
 
 +
=== boot.img ===
 +
 
 +
This image is package the kernel Image and dtb file into a know filesystem(FAT or EXT2) image for distro boot.
  
−
<br/> To flash rootfs
+
See [[Rockchip_Kernel#Install_Boot.2Fkernel|Install kernel]] for detail about generate boot.img from kernel zImage/Image, dtb.
−
<pre>sudo dd if=linaro-rootfs.img of=/dev/sdb7 conv=notrunc</pre>
 
  
−
== Boot from SD/TF Card ==
+
Flash the boot.img to offset 0x8000 which is stage 4.
  
−
=== Creating Image ===
+
=== rootfs.img ===
  
−
Follow&nbsp;[http://rockchip.wikidot.com/linux-user-guide linux-user-guide]&nbsp;to build kernel and U-Boot.<br/> get uboot-spl.img and u-boot-dtb.img
+
Flash the rootfs.img to offset 0x40000 which is stage 5. As long as the kernel you chosen can support that filesystem, there is not limit in the format of the image.
−
<pre>tools/mkimage -n rk3288 -T rksd -d spl/u-boot-spl-dtb.bin uboot-spl.img
 
−
</pre>
 
  
−
&nbsp;
+
=== rkxx_loader_vx.xx.xxx.bin ===
  
−
=== <br/> <var>build boot.img</var> ===
+
This is provide by Rockchip in binary mode, which is used for firmware upgrade to eMMC with [[Rkdeveloptool|rkdeveloptool]], can not be wirte to media device directly.
−
<pre>sudo dd if=/dev/zero of=boot.img bs=1M count=128
 
−
sudo mkfs.fat boot.img
 
−
mkdir boot
 
−
sudo mount  boot.img boot
 
−
sudo cp zImage boot
 
−
sudo cp rk3288-fennec.dtb boot
 
−
sudo mkdir boot/extlinux
 
−
sudo cp extlinux.conf boot/extlinux
 
−
sudo umount boot
 
−
</pre>
 
  
−
Download rootfs image and rename it
+
This is a package from ddr.bin, usbplug.bin, miniloader.bin, Rockchip tool ''DB ''command will make usbplug.bin running in target which perform as a Rockusb device. You can skip to package this image, Rockchip will offer this image at the most of time.
−
<pre>mv linaro-rootfs.img rootfs.img
 
−
</pre>
 
  
 
&nbsp;
 
&nbsp;
  
−
=== Making a SD Card for updating ===
+
= Flash and boot from Media device =
 +
 
 +
Here we introduce how to write image to different Medeia device.
  
−
Download&nbsp;[https://github.com/wzyy2/rk-initrd-build ramdisk source]&nbsp;and build.
+
Get image Ready:
−
<pre>sh ./mk-initrd.sh
 
−
</pre>
 
  
−
Format SD card
+
*For&nbsp;with SPL:
−
<pre>chen@chen-HP-ProDesk-680-G1-TWR:~/work/linaro-alip/ramdisk/update$ sudo gdisk /dev/sdb
+
**idbloader.img
−
GPT fdisk (gdisk) version 0.8.8
+
**u-boot.itb
 +
**boot.img or&nbsp;boot folder with Image, dtb and exitlinulx inside
 +
**rootfs.img 
 +
*For&nbsp;with miniloader
 +
**idbloader.img
 +
**uboot.img
 +
**trust.img
 +
**boot.img or&nbsp;boot folder with Image, dtb and exitlinulx inside
 +
**rootfs.img 
  
−
Partition table scan:
+
&nbsp;
−
  MBR: protective
 
−
  BSD: not present
 
−
  APM: not present
 
−
  GPT: present
 
  
−
Found valid GPT with protective MBR; using GPT.
+
== Boot from eMMC ==
  
−
Command (? for help): o
+
The eMMC is on the hardware board, so we need:
−
This option deletes all partitions and creates a new protective MBR.
 
−
Proceed? (Y/N): y
 
  
−
Command (? for help): n
+
*Get the board into [[Rockusb#Maskrom_mode|maskrom mode]];
−
Partition number (1-128, default 1): 1
+
*Connect the target to PC with USB cable;
−
First sector (34-126613470, default = 2048) or {+-}size{KMGTP}: 8192
+
*Flash the image to eMMC with [[Rkdeveloptool|rkdeveloptool]]
−
Last sector (8192-126613470, default = 126613470) or {+-}size{KMGTP}:
 
−
Current type is 'Linux filesystem'
 
−
Hex code or GUID (L to show codes, Enter = 8300):
 
−
Changed type of partition to 'Linux filesystem'
 
  
−
Command (? for help): w
+
Example commands for flash image to target.
  
−
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
+
Flash the gpt partition to target:
−
PARTITIONS!!
+
<pre style="margin-left: 40px;">rkdeveloptool db rkxx_loader_vx.xx.bin
 +
rkdeveloptool gpt parameter_gpt.txt</pre>
  
−
Do you want to proceed? (Y/N): y
+
*For&nbsp;with SPL:
−
OK; writing new GUID partition table (GPT) to /dev/sdc.
+
<pre style="margin-left: 40px">rkdeveloptool db rkxx_loader_vx.xx.bin
−
Warning: The kernel is still using the old partition table.
+
rkdeveloptool wl 0x40 idbloader.img
−
The new table will be used at the next reboot.
+
rkdeveloptool wl 0x4000 u-boot.itb
−
The operation has completed successfully.
+
rkdeveloptool wl 0x8000 boot.img
 +
rkdeveloptool wl 0x40000 rootfs.img
 +
rkdeveloptool rd
 
</pre>
 
</pre>
−
<pre>sudo umount /dev/sdb1
+
 
−
sudo mkfs.fat /dev/sdb1
+
*For&nbsp;with miniloader
 +
<pre style="margin-left: 40px">rkdeveloptool db rkxx_loader_vx.xx.bin
 +
rkdeveloptool ul rkxx_loader_vx.xx.bin
 +
rkdeveloptool wl 0x4000 uboot.img
 +
rkdeveloptool wl 0x6000 trust.img
 +
rkdeveloptool wl 0x8000 boot.img
 +
rkdeveloptool wl 0x40000 rootfs.img
 +
rkdeveloptool rd
 
</pre>
 
</pre>
−
<pre>tools/mkimage -n rk3288 -T rksd -d spl/u-boot-spl-dtb.bin out&&
+
 
−
sudo dd if=out of=/dev/sdb seek=64&&sudo dd if=u-boot-dtb.img of=/dev/sdb seek=256
+
&nbsp;
 +
 
 +
 
 +
== Boot from SD/TF Card ==
 +
 
 +
We can write SD/TF card with Linux PC ''dd'' command very easily.
 +
 
 +
Insert SD card to PC and we assume the /dev/sdb is the SD card device.
 +
 
 +
*For&nbsp;with SPL:
 +
<pre style="margin-left: 40px">dd if=idbloader.img of=sdb seek=64
 +
dd if=u-boot.itb of=sdb seek=16384
 +
dd if=boot.img of=sdb seek=32768
 +
dd if=rootfs.img of=sdb seek=262144
 
</pre>
 
</pre>
  
−
Copy zimage, dts and ramdisk to /dev/sdb1
+
*For&nbsp;with miniloader:
−
<pre>cp arch/arm/boot/zImage /media/chen/9F35-9565/
+
<pre style="margin-left: 40px">dd if=idbloader.img of=sdb seek=64
−
cp arch/arm/boot/dts/rk3288-fennec.dtb /media/chen/9F35-9565/rk3288-fennec.dtb
+
dd if=uboot.img of=sdb seek=16384
−
cp ../rk-initrd-build/initrd.img /media/chen/9F35-9565/
+
dd if=trust.img of=sdb seek=24576
 +
dd if=boot.img of=sdb seek=32768
 +
dd if=rootfs.img of=sdb seek=262144</pre>
 +
 
 +
In order to make sure everything has write to SD card before unpluged, recommand to run below command:
 +
<pre>sync</pre>
 +
 
 +
Note, when using boot from SD card, need to update the kernel cmdline(which is in extlinux.conf) for the correct ''root ''value.
 +
<pre>append  earlyprintk console=ttyS2,115200n8 rw root=/dev/mmcblk1p7 rootwait rootfstype=ext4 init=/sbin/init
 
</pre>
 
</pre>
  
−
Add extlinux/extlinux.conf to /dev/sdb1
+
Write GPT partition table to SD card&nbsp;in U-Boot, and then U-Boot can find the boot partition and run into kernel.
−
<pre>label kernel-4.4
+
<pre>gpt write mmc 0 $partitions
−
    kernel /zImage
 
−
    fdt /rk3288-fennec.dtb
 
−
    initrd /initrd.img
 
−
    append  earlyprintk console=ttyS2,115200n8 rw root=/dev/ram0 rootfstype=ext4 init=/sbin/init ramdisk_size=49152
 
 
</pre>
 
</pre>
  
−
Copy u-boot-dtb.img uboot-spl.img boot.img rootfs.img and&nbsp;[https://github.com/wzyy2/rk-initrd-build/blob/master/update/update.sh update.sh]&nbsp;to /dev/sdb1
+
== Boot from U-Disk ==
−
<pre>mkdir /media/chen/9F35-9565/update
+
 
−
cp u-boot-dtb.img /media/chen/9F35-9565/update
+
Same as&nbsp;[[#Boot_from_SD.2FTF_Card|boot-from-sdcard]], but please note that U-Disk&nbsp;only support stage 4 and 5, see [[#Boot_Stage|Boot Stage]] for detail.
−
cp uboot-spl.img /media/chen/9F35-9565/update
 
−
cp boot.img /media/chen/9F35-9565/update
 
−
cp rootfs.img /media/chen/9F35-9565/update
 
−
cp update.sh /media/chen/9F35-9565/update
 
−
</pre>
 
  
−
=== Updating the board ===
+
If U-Disk used for stage 4 and 5, format the U-Disk in gpt format and at least 2 partitions, write ''boot.img'' and ''rootfs.img'' in those partitions;
  
−
Boot the board and it will flash image to eMMC
+
if U-Dist is only used for stage 5, we can ''dd ''the ''rootfs.img'' to U-Disk device directly.
  
−
&nbsp;
+
Note, need to update the kernel cmdline(which is in extlinux.conf) for the correct ''root ''value.
 +
<pre>    append  earlyprintk console=ttyS2,115200n8 rw root=/dev/sda1 rootwait rootfstype=ext4 init=/sbin/init
 +
</pre>
  
 +
== Boot from Network ==
  
−
== Boot from USB-Disk ==
+
To be continued.
  
−
Same as&nbsp;[[#Boot_from_eMMC|boot-from-sdcard]], but please note that U-Boot aren't allowed to boot from usb-disk because of restrict of maskrom, only kernel and rootfs can load from USB-Disk.
+
= See also =
  
−
Difference:
+
[[Rkdeveloptool|rkdeveloptool]]
−
<pre><code>label kernel-4.4
 
−
    kernel /zImage
 
−
    fdt /rk3288-fennec.dtb
 
−
    append  earlyprintk console=ttyS2,115200n8 rw root=/dev/sda1 rootfstype=ext4 init=/sbin/init</code>
 
−
</pre>
 
−
<pre><code>gpt write usb 0 $partitions
 
−
ums 0 usb 0</code>
 
−
</pre>
 
  
−
= Boot from Network =
+
[[Rockusb|rockusb]]
  
−
&nbsp;
+
[[Partitions|Rockchip Linux partition definition]]

Latest revision as of 03:52, 15 November 2019


Boot introduce

First, let's make the concept clear, there are many boot stages when we boot up a Linux OS;

Then we need to know about how the image should packaged, where the image locate;

At last, we will explain how to write to different media and boot from there.

Here is Rockchip pre-released binaries which may be mentioned later:

https://github.com/rockchip-linux/rkbin

And Rockcip Linux GPT partition here.

 

Boot flow

This chapter introduce the generic boot flow for Rockchip Application Processors, including the detail about what image we may use in Rockchip platform for kind of boot path:

- use U-Boot TPL/SPL from upsream or rockchip U-Boot, fully source code;

- use Rockchp idbLoader which is combinded by Rockchip ddr init bin and miniloader bin from Rockchip rkbin project; 

+--------+----------------+----------+-------------+---------+
| Boot   | Terminology #1 | Actual   | Rockchip    | Image   |
| stage  |                | program  |  Image      | Location|
| number |                | name     |   Name      | (sector)|
+--------+----------------+----------+-------------+---------+
| 1      |  Primary       | ROM code | BootRom     |         |
|        |  Program       |          |             |         |
|        |  Loader        |          |             |         |
|        |                |          |             |         |
| 2      |  Secondary     | U-Boot   |idbloader.img| 0x40    | pre-loader
|        |  Program       | TPL/SPL  |             |         |
|        |  Loader (SPL)  |          |             |         |
|        |                |          |             |         |
| 3      |  -             | U-Boot   | u-boot.itb  | 0x4000  | including u-boot and atf
|        |                |          | uboot.img   |         | only used with miniloader
|        |                |          |             |         |
|        |                | ATF/TEE  | trust.img   | 0x6000  | only used with miniloader
|        |                |          |             |         |
| 4      |  -             | kernel   | boot.img    | 0x8000  |
|        |                |          |             |         |
| 5      |  -             | rootfs   | rootfs.img  | 0x40000 |
+--------+----------------+----------+-------------+---------+

Then when we talking about boot from eMMC/SD/U-Disk/net, they are in different concept:

  • Stage 1 is always in boot rom, it loads stage 2 and may load stage 3(when SPL_BACK_TO_BROM option enabled).
  • Boot from SPI flash means firmware for stage 2 and 3(SPL and U-Boot only) in SPI flash and stage 4/5 in other place;
  • Boot from eMMC means all the firmware(including stage 2, 3, 4, 5) in eMMC;
  • Boot from SD card means all the firmware(including stage 2, 3, 4, 5) in SD card;
  • Boot from U-Disk means firmware for stage 4 and 5(not including SPL and U-Boot) in Disk, optionally only including stage 5;
  • Boot from net/tftp means firmeware for stage 4 and 5(not including SPL and U-Boot) on the network;

 

Rockchip bootflow.jpg

Boot Flow 1 is typical Rockchip boot flow with Rockchip miniloader;
Boot Flow 2 is used for most SoCs with U-Boot TPL for ddr init and SPL for trust(ATF/OP-TEE) load and run into next stage;

Note 1. If loader1 have more than 1 stage, program will back to bootrom and bootrom load and run into next stage. eg. If loader1 is tpl and spl, the bootrom will run into tpl first, tpl init ddr and back to bootrom, bootrom then load and run into spl.
Note 2. If trust is enabled, loader1 need to load both trust and u-boot, and then run into trust in secure mode(EL3 in armv8), trust do the initialize and run into U-Boot in non-secure mode(EL2 in armv8).
Note 3. For trust(in trust.img or u-boot.itb), armv7 has only one tee.bin with or without ta, armv8 has bl31.elf and option with bl32.
Note 4. In boot.img, content can be zImage and its dtb for Linux, and can optionally be grub.efi, and can be AOSP boot.img, ramdisk is option;

Package option

After we know about the boot stages,

Here are the file list before package for stage 2~4:

  • From source code:
    • From U-Boot: u-boot-spl.bin, u-boot.bin(may use u-boot-nodtb.bin and u-boot.dtb instead),
    • From kernel: kernel Image/zImage file, kernel dtb,
    • From ATF: bl31.elf;
  • From Rockchip binary:
    • ddr, usbplug, miniloader, bl31/op-tee, (all with chip 'rkxx_'  prefix and with version '_x.xx.bin' postfix);

We offer two different boot-loader methods for different solutions, the steps and request files are also complete different. But not all the platforms supports the both boot-loader methods. Here are the types to package image from those files:

 



The Pre-bootloader(IDBLoader)

What is idbloader

idbloader.img is a Rockchip format pre-loader suppose to work at SoC start up, it contains:

- IDBlock header which is known by Rockchip BootRom;

- DRAM init program which is load by MaskRom and running at internal SRAM;

- loader for next stage which is load by MaskRom and running at DDR SDRAM;

You can get idbloader with below methods.

Get idbloader for eMMC from Rockchip release loader

No need to package a idbloader.img for eMMC if you are using Rockchip release loader, you can get idbloader on eMMC with below command: 

rkdeveloptool db rkxx_loader_vx.xx.bin
rkdeveloptool ul rkxx_loader_vx.xx.bin

Package the idbloader.img from Rockchip binary:

For SD boot or eMMC(update with rockusb wl cmd), you need a idbloader(combinded with ddr and miniloader) . 

tools/mkimage -n rkxxxx -T rksd -d rkxx_ddr_vx.xx.bin idbloader.img
cat rkxx_miniloader_vx.xx.bin >> idbloader.img

Package the idbloader.img from U-Boot TPL/SPL(which is fully open source):

tools/mkimage -n rkxxxx -T rksd -d tpl/u-boot-tpl.bin idbloader.img
cat spl/u-boot-spl.bin >> idbloader.img

Flash the idbloader.img to offset 0x40 which including stage 2, and you will need a uboot.img for boot stage 3.

U-Boot

uboot.img

When using idbLoader from Rockchip miniloader, need package u-boot.bin into miniloader loadable format by Rockchip tool loaderimage. 

tools/loaderimage --pack --uboot u-boot.bin uboot.img $SYS_TEXT_BASE

Where SoCs may have different $SYS_TEXT_BASE.

u-boot.itb

When using SPL to load the ATF/OP-TEE, package the bl31.bin, u-boot-nodtb.bin and uboot.dtb into one FIT image. You can skip the step to package the Trust image and flash that image in the next section. 

make u-boot.itb

Note: please copy the trust binary() to u-boot root directory and rename it to tee.bin(armv7) or bl31.elf(armv8).

Trust

trust.img

When using idbLoader from Rockchip miniloader, need package bl31.bin into miniloader loadable format by Rockchip tool trustmerge. 

tools/trustmerge tools/rk_tools/RKTRUST_RKXXXXTRUST.ini

Flash the trust.img to offset 0x6000 which is for using Rockchip miniloader

boot.img

This image is package the kernel Image and dtb file into a know filesystem(FAT or EXT2) image for distro boot.

See Install kernel for detail about generate boot.img from kernel zImage/Image, dtb.

Flash the boot.img to offset 0x8000 which is stage 4.

rootfs.img

Flash the rootfs.img to offset 0x40000 which is stage 5. As long as the kernel you chosen can support that filesystem, there is not limit in the format of the image.

rkxx_loader_vx.xx.xxx.bin

This is provide by Rockchip in binary mode, which is used for firmware upgrade to eMMC with rkdeveloptool, can not be wirte to media device directly.

This is a package from ddr.bin, usbplug.bin, miniloader.bin, Rockchip tool DB command will make usbplug.bin running in target which perform as a Rockusb device. You can skip to package this image, Rockchip will offer this image at the most of time.

 

Flash and boot from Media device

Here we introduce how to write image to different Medeia device.

Get image Ready:

  • For with SPL:
    • idbloader.img
    • u-boot.itb
    • boot.img or boot folder with Image, dtb and exitlinulx inside
    • rootfs.img
  • For with miniloader
    • idbloader.img
    • uboot.img
    • trust.img
    • boot.img or boot folder with Image, dtb and exitlinulx inside
    • rootfs.img

 

Boot from eMMC

The eMMC is on the hardware board, so we need:

Example commands for flash image to target.

Flash the gpt partition to target: 

rkdeveloptool db rkxx_loader_vx.xx.bin
rkdeveloptool gpt parameter_gpt.txt
  • For with SPL: 
rkdeveloptool db rkxx_loader_vx.xx.bin
rkdeveloptool wl 0x40 idbloader.img
rkdeveloptool wl 0x4000 u-boot.itb
rkdeveloptool wl 0x8000 boot.img
rkdeveloptool wl 0x40000 rootfs.img
rkdeveloptool rd
  • For with miniloader 
rkdeveloptool db rkxx_loader_vx.xx.bin
rkdeveloptool ul rkxx_loader_vx.xx.bin
rkdeveloptool wl 0x4000 uboot.img
rkdeveloptool wl 0x6000 trust.img
rkdeveloptool wl 0x8000 boot.img
rkdeveloptool wl 0x40000 rootfs.img
rkdeveloptool rd

 


Boot from SD/TF Card

We can write SD/TF card with Linux PC dd command very easily.

Insert SD card to PC and we assume the /dev/sdb is the SD card device.

  • For with SPL: 
dd if=idbloader.img of=sdb seek=64
dd if=u-boot.itb of=sdb seek=16384
dd if=boot.img of=sdb seek=32768
dd if=rootfs.img of=sdb seek=262144
  • For with miniloader: 
dd if=idbloader.img of=sdb seek=64
dd if=uboot.img of=sdb seek=16384
dd if=trust.img of=sdb seek=24576
dd if=boot.img of=sdb seek=32768
dd if=rootfs.img of=sdb seek=262144

In order to make sure everything has write to SD card before unpluged, recommand to run below command: 

sync

Note, when using boot from SD card, need to update the kernel cmdline(which is in extlinux.conf) for the correct root value. 

append  earlyprintk console=ttyS2,115200n8 rw root=/dev/mmcblk1p7 rootwait rootfstype=ext4 init=/sbin/init

Write GPT partition table to SD card in U-Boot, and then U-Boot can find the boot partition and run into kernel. 

gpt write mmc 0 $partitions

Boot from U-Disk

Same as boot-from-sdcard, but please note that U-Disk only support stage 4 and 5, see Boot Stage for detail.

If U-Disk used for stage 4 and 5, format the U-Disk in gpt format and at least 2 partitions, write boot.img and rootfs.img in those partitions;

if U-Dist is only used for stage 5, we can dd the rootfs.img to U-Disk device directly.

Note, need to update the kernel cmdline(which is in extlinux.conf) for the correct root value. 

    append  earlyprintk console=ttyS2,115200n8 rw root=/dev/sda1 rootwait rootfstype=ext4 init=/sbin/init

Boot from Network

To be continued.

See also

rkdeveloptool

rockusb

Rockchip Linux partition definition

Retrieved from "http://opensource.rock-chips.com/index.php?title=Boot_option&oldid=2187"