RK3066-U-Boot
U-Boot Guide
Contents
Download U-Boot
Upstream U-Boot
You can clone the u-boot repository by running:
git clone git://git.denx.de/u-boot.git
Alternatively you can use u-boot-rockchip instead which may with some patches not get in mainline:
git clone git://git.denx.de/u-boot-rockchip.git
Rockchip U-Boot
You can clone the u-boot repository by running:
git clone https://github.com/rockchip-linux/u-boot.git
Configure U-Boot
First you need to choose a correct defconfig for your board; (defconfig on uboot/configs)
make CROSS_COMPILE=arm-linux-gnueabi- kylin-rk3036_defconfig
You may need to change the U-Boot function/feature support by modify the defconfig file or,
there is also menuconfig to play with settings if you feel like it:
make CROSS_COMPILE=arm-linux-gnueabi- menuconfig
Build U-Boot
Get a toolchain
If you haven't done so before, get a suitable toolchain installed and add it to your PATH.
In Ubuntu 16.04, you can use below command to install cross compiler for armv7:
sudo apt-get install gcc-arm-linux-gnueabi
Start Build
make CROSS_COMPILE=arm-linux-gnueabi-
In order to support debug in ARM DS-5, you may need add ctags in make command:
CFLAGS='-gdwarf-3'
For trust support, we are using FIT image with 'mkimage' cmd in Makefile and its script defined in defconfig:
make u-boot.itb
Generate Image:
tools/mkimage -n rk3036 -T rksd -d spl/u-boot-spl-nodtb.bin rk3036_idb.img
cat u-boot.bin >> rk3036_idb.img cp rk3036_idb.img ../out/u-boot/
Install U-Boot
Rockchip SoCs's bootrom need special format named IDBlock at special offset 0x40 block for boot, so we need to package SPL(or Rockchip miniloader) in IDB format.
Rockchip bootrom supports SPL back to bootrom and bootrom load the U-Boot, so the SPL for Rockchip SoCs can option to back to bootrom, usually decided by if the IRAM is enough for driver to load U-Boot.
(Ensure the board is in maskrom mode. maskrom, Not rockusb! ):
sudo rkdeveloptool db rk3036_loader_v1.07.237.bin sudo rkdeveloptool wl 0x40 out/u-boot/rk3036_idb.img
