Difference between revisions of "FAQ"

From Rockchip open source Document
Jump to: navigation, search
Line 1: Line 1:
 +
  
  
Line 9: Line 10:
 
PMIC:
 
PMIC:
  
PMIC setting usually doesn't matter in u-boot,  but for the board using rk818, [https://github.com/rockchip-linux/u-boot/blob/release/arch/arm/mach-rockchip/rk3288-board-spl.c#L172 USB input current] should be configured during boot stage.
+
PMIC setting usually doesn't matter in u-boot,  but for the board with rk818, [https://github.com/rockchip-linux/u-boot/blob/release/arch/arm/mach-rockchip/rk3288-board-spl.c#L172 USB input current] should be configured during boot stage.
  
 
Boot:
 
Boot:
  
 
Please note some board have disable emmc in u-boot though the hardware actually have emmc. (firefly-rk3288)
 
Please note some board have disable emmc in u-boot though the hardware actually have emmc. (firefly-rk3288)

Revision as of 01:07, 11 October 2017


How to select board config

DDR:

We use opensource idbloader(See Boot_option)  on some chips (rk3036, rk3288) and its dmc driver can't support ddr-type autodetct, so the wrong ddr dts settings will make the board failed to enter u-boot.

PMIC:

PMIC setting usually doesn't matter in u-boot,  but for the board with rk818, USB input current should be configured during boot stage.

Boot:

Please note some board have disable emmc in u-boot though the hardware actually have emmc. (firefly-rk3288)