Difference between revisions of "Rkdeveloptool"

From Rockchip open source Document
Jump to: navigation, search
m (Kever moved page Rkdevelptool to Rkdeveloptool)
 
(One intermediate revision by the same user not shown)
Line 9: Line 9:
 
<pre>git clone https://github.com/rockchip-linux/rkdeveloptool.git
 
<pre>git clone https://github.com/rockchip-linux/rkdeveloptool.git
 
</pre>
 
</pre>
 +
 +
  
 
= Build rkdeveloptool =
 
= Build rkdeveloptool =
  
 
First, install the libusb and udev. In Ubuntu,&nbsp;
 
First, install the libusb and udev. In Ubuntu,&nbsp;
<pre>sudo apt-get install libudev-dev libusb-1.0-0-dev</pre>
+
<pre>sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf</pre>
  
 
Then&nbsp;
 
Then&nbsp;
Line 20: Line 22:
 
make
 
make
 
make install
 
make install
 +
</pre>
 +
 +
&nbsp;
 +
 +
If you encounter compile error like below
 +
<pre>./configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
 +
./configure: line 4269: `PKG_CHECK_MODULES(LIBUSB1,libusb-1.0)'
 +
</pre>
 +
 +
You should install pkg-config libusb-1.0
 +
<pre>sudo&nbsp;apt-get&nbsp;install&nbsp;pkg-config&nbsp;libusb-1.0&nbsp;
 
</pre>
 
</pre>
  

Latest revision as of 07:36, 30 August 2017

rkdeveloptool is a tool from Rockchip to communicate with Rockusb devices, consider to be a opensource version of upgrade_tool with very little difference.

 

Download rkdeveloptool

Get the source code for rkdeveloptool

git clone https://github.com/rockchip-linux/rkdeveloptool.git


Build rkdeveloptool

First, install the libusb and udev. In Ubuntu, 

sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf

Then 

autoreconf -i
./configure
make
make install

 

If you encounter compile error like below

./configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
./configure: line 4269: `PKG_CHECK_MODULES(LIBUSB1,libusb-1.0)'

You should install pkg-config libusb-1.0

sudo apt-get install pkg-config libusb-1.0 

Usage

Support commands


Tool Usage ---------------------

Help:             -H
Version:          -V
DownloadBoot:    DB <Loader>
UpgradeLoader:    UL <Loader>
ReadLBA:        RL  <BeginSec> <SectorLen> <File>
WriteLBA:        WL  <BeginSec> <File>
WriteGPT:       GPT <parameter>
EraseFlash:        EF 
TestDevice:        TD
ResetDevice:    RD [subcode]
ReadFlashID:    RID
ReadFlashInfo:    RFI
ReadChipInfo:    RCI
-------------------------------------------------------
 

 

 

Flash image to target emmc

In order to flash image to target emmc, 

  1. Make target  get into rockusb mode;
  2. Connect target to Host PC via USB;
  3. Write the image to the eMMC with tool command;
  • use download boot command to make target init DRAM and run usbplug;
rkdeveloptool db rkxx_loader_vx.xx.bin
  • use wl command to write image to target, this step can be repeat for many times;
rkdeveloptool wl 0x40 idbLoader.img
rkdeveloptool wl 0x4000 uboot.img
rkdeveloptool wl 0x8000 boot.img
rkdeveloptool wl 0x40000 rootfs.img
  • usb ul command to write idbloader into idb from rockchip loader
rkdeveloptool ul rkxx_loader_vx.xx.bin

NOTE: The ul command is the same operation with below command when using Rockchip miniloader, but using different source.

rkdeveloptool wl 0x40 idbLoader.img

NOTE2: The ul command in rkdeveloptool(ul= wl idbloader) is different with the command in upgrade_tool(ul = db + wl idbloader + rd).

  • use gpt command to write gpt table with parameter_gpt.txt
rkdeveloptool gpt parameter_gpt.txt
  • use rd comamnd to reset the target after image write complete
rkdeveloptool rd

 

See also

Rockchip Linux partitions definition

Boot_option

Rockusb