Difference between revisions of "Fastboot"

From Rockchip open source Document
Jump to: navigation, search
 
(5 intermediate revisions by one other user not shown)
Line 4: Line 4:
 
Fastboot is a protocol that can be used to re-flash partitions on your device (update the flash file system in your devices). It is this small tool that comes with the Android SDK (Software Developer Kit), which is an alternative to the Recovery Mode for doing installations and updates. It first comes with Android. Google have submit the fastboot code to mainline U-boot. So we can use this protocol to flash partition on your device. There are three way to enter fastboot mode
 
Fastboot is a protocol that can be used to re-flash partitions on your device (update the flash file system in your devices). It is this small tool that comes with the Android SDK (Software Developer Kit), which is an alternative to the Recovery Mode for doing installations and updates. It first comes with Android. Google have submit the fastboot code to mainline U-boot. So we can use this protocol to flash partition on your device. There are three way to enter fastboot mode
  
 +
 
  
 +
 
  
 +
 
  
 
+
 
 
 
 
 
  
 
= Fastboot command =
 
= Fastboot command =
  
 
Rockchip use 0x2207 as its USB vendor ID. This VID is not in Google's original fastboot code. So every fastboot command have to use "-i" parameter to specify vid to fastboot.<br/> To list all the Rockchip devices attached to your USB port in fastboot mode.
 
Rockchip use 0x2207 as its USB vendor ID. This VID is not in Google's original fastboot code. So every fastboot command have to use "-i" parameter to specify vid to fastboot.<br/> To list all the Rockchip devices attached to your USB port in fastboot mode.
<pre><code>$ sudo fastboot -i 0x2207 devices
+
<pre>$ sudo fastboot -i 0x2207 devices
0123456789AB fastboot</code>
+
0123456789AB fastboot
 
</pre>
 
</pre>
  
 
To flash loader
 
To flash loader
<pre><code>$ sudo fastboot -i 0x2207 flash loader "path to your loader"</code>
+
<pre>$ sudo fastboot -i 0x2207 flash loader "path to your loader"
 
</pre>
 
</pre>
  
 
To flash android boot image
 
To flash android boot image
<pre><code>$ sudo fastboot -i 0x2207 flash boot_a "path to your boot image"
+
<pre>$ sudo fastboot -i 0x2207 flash boot_a "path to your boot image"
0123456789AB fastboot</code>
+
0123456789AB fastboot
 
</pre>
 
</pre>
  
 
To flash android system image
 
To flash android system image
<pre><code>$ sudo fastboot -i 0x2207 flash system_a "path to your system image"
+
<pre>$ sudo fastboot -i 0x2207 flash system_a "path to your system image"
0123456789AB fastboot</code></pre>
+
0123456789AB fastboot</pre>
  
 
To get version:
 
To get version:
Line 63: Line 64:
 
</pre>
 
</pre>
  
 
+
&nbsp;
  
 
== Download the Image ==
 
== Download the Image ==
Line 81: Line 82:
 
(The firmware package was generated from &nbsp;android source code <var>make updatepackage</var>)
 
(The firmware package was generated from &nbsp;android source code <var>make updatepackage</var>)
  
 +
&nbsp;
  
 
== Reboot ==
 
== Reboot ==
Line 128: Line 130:
 
<pre>fastboot oem ucmd <UBOOT cmds></pre>
 
<pre>fastboot oem ucmd <UBOOT cmds></pre>
  
 +
&nbsp;
 +
 +
&nbsp;
  
 +
&nbsp;
  
== Unlock your device via fastboot ==
+
&nbsp;
  
With locked fastboot,it is&nbsp;
+
== Unlock your Device via Fastboot ==
  
fastboot锁住状态下,不允许烧写及执行oem命令,初始状态为锁住。
+
Initially,it is not allow you perform flash or&nbsp;oem command with locked fastboot.
  
'''To relock the bootloader''':
+
'''To relock''':
  
1、 Executing <var>fastboot oem unlock</var>
+
1、Executing <var>fastboot oem unlock</var>
  
 
2、Then executing&nbsp;<var>fastboot oem unlock_accept in 5 seconds,</var>
 
2、Then executing&nbsp;<var>fastboot oem unlock_accept in 5 seconds,</var>
  
3、机器会重启进入recovery恢复出厂设置
+
3、You device will reboot and recovery
  
4、Now put your device into fastboot mode, and <var>fastboot getvar unlocked will return to&nbsp;</var>"yes"
+
4、Now push&nbsp;your device into fastboot mode again and <var>fastboot getvar unlocked will return to&nbsp;</var>"yes"
  
 
(Congraduations you have unlock your device finished!)
 
(Congraduations you have unlock your device finished!)
  
what if the device have entered into fastboot mode with note that ,&nbsp;
+
What if the device have entered into fastboot mode with indicates that <var>NOT found your device</var>, you need put '''<var>-i&nbsp;</var>'''into your command in order to assign device ID.
 +
 
 +
For example:fastboot -i 0x2207 getvar unlocked
  
如果设备进入fastboot状态后,fastboot命令提示未发现设备,则需要在命令中加入-i参数指定设备vid,例如fastboot -i 0x2207 getvar unlocked
+
&nbsp;

Latest revision as of 11:20, 16 March 2017

Introduction

Fastboot is a protocol that can be used to re-flash partitions on your device (update the flash file system in your devices). It is this small tool that comes with the Android SDK (Software Developer Kit), which is an alternative to the Recovery Mode for doing installations and updates. It first comes with Android. Google have submit the fastboot code to mainline U-boot. So we can use this protocol to flash partition on your device. There are three way to enter fastboot mode

 

 

 

 

Fastboot command

Rockchip use 0x2207 as its USB vendor ID. This VID is not in Google's original fastboot code. So every fastboot command have to use "-i" parameter to specify vid to fastboot.
To list all the Rockchip devices attached to your USB port in fastboot mode.

$ sudo fastboot -i 0x2207 devices
0123456789AB fastboot

To flash loader

$ sudo fastboot -i 0x2207 flash loader "path to your loader"

To flash android boot image

$ sudo fastboot -i 0x2207 flash boot_a "path to your boot image"
0123456789AB fastboot

To flash android system image

$ sudo fastboot -i 0x2207 flash system_a "path to your system image"
0123456789AB fastboot

To get version:

fastboot getvar version

To get version:

fastboot getvar version-bootloader

To get unlocked:

fastboot getvar unlocked 

To get locked:

fastboot getvar secure

To get product information:

fastboot getvar product

To get serialno:

fastboot getvar serialno

To get partition type:

fastboot getvar partition-type:<partition_name>

To get partition size:

fastboot getvar partition-size:<partition_name>

To get partition offset:

fastboot getvar partition-offset:<partition_name>

 

Download the Image

To flash image:

fastboot flash <partition_name> <filename>

 (For example:fastboot flash system system.img)

When download the parameter or loader,you need assign the partition name as "parameter" or "loader"

To update firmware:

fastboot update <filename> 

(The firmware package was generated from  android source code make updatepackage

 

Reboot

 To recovery:

fastboot oem recovery 

 To recovery and restore:

fastboot oem recovery:wipe_data

To Reboot:

fastboot reboot

To reboot and enter into rockusb loader mode

fastboot reboot-bootloader

To continue:

fastboot continue 

 

Lock and Unlock the Device

To unlock:

fastboot oem unlock

To  confirm unlock(input  it in 5 minutes after typing fastboot oem unlock command):

fastboot oem unlock_accep

To lock the device:

fastboot oem lock

 

Special Command

To boot from specifc firmware templately:

fastboot boot <kernel> [ <ramdisk> ]

(Kernel supports Image/zImage,and you should keep dtb in the last part of kernel,or resource partition

To generate a log file:

fastboot oem log 

To execute u-Boot command:

fastboot oem ucmd <UBOOT cmds>

 

 

 

 

Unlock your Device via Fastboot

Initially,it is not allow you perform flash or oem command with locked fastboot.

To relock

1、Executing fastboot oem unlock

2、Then executing fastboot oem unlock_accept in 5 seconds,

3、You device will reboot and recovery

4、Now push your device into fastboot mode again and fastboot getvar unlocked will return to "yes"

(Congraduations you have unlock your device finished!)

What if the device have entered into fastboot mode with indicates that NOT found your device, you need put -i into your command in order to assign device ID.

For example:fastboot -i 0x2207 getvar unlocked